Tekmark carries the full Keysight RF and microwave portfolio across 172 instruments: Keysight network analyzers including vector network analyzers (VNAs), signal generators, spectrum analyzers, and the accessories that connect them to your DUT.
As an authorized Keysight distributor in Malaysia, Singapore, and the Philippines, we provide local RF application support.
Measure reflection and transmission characteristics (S11, S21, S12, S22) of RF components, filters, amplifiers, cables, and antennas using vector network analyzers (VNAs).
Generate CW, modulated, and digitally modulated RF signals for receiver sensitivity testing, transmitter calibration, and wireless standards compliance.
Measure signal frequency content, power, occupied bandwidth, and modulation quality for RF transmitters, receivers, and wireless systems.
Measure antenna return loss, VSWR, gain, and radiation patterns. Characterize cable and connector performance using distance-to-fault (DTF) and time-domain reflectometry (TDR).
Characterize low-noise amplifier (LNA) and receiver front-end performance by measuring noise figure, gain, and noise temperature.
Test RF components, modules, and systems operating at millimeter-wave frequencies (above 30 GHz) for 5G, radar, satellite, and automotive radar applications.
Explore the most common Keysight RF & Microwave Measurement available on Tekmark.
Programmable DC power supplies for bench use, R&D, production test, and automated systems. Keysight DC supplies range from compact single-output bench units to high-power, high-density rack-mount models for powering automotive, aerospace, and industrial DUTs.
Available series on Tekmark: E36100 Series (basic bench), E36200 Series (autoranging), N6700/N6900 Series (modular, high-performance), RP7900 Series (regenerative, high-power). 366 models available.
CW and vector signal generators for producing RF stimulus signals used in receiver testing, transmitter calibration, and wireless standards compliance testing (5G NR, LTE, Wi-Fi, radar). Covered in detail on the Function & Signal Generators page.
Available series on Tekmark: CXG, MXG, PSG, E8257D. 26 models available.
Signal and spectrum analyzers for measuring frequency-domain characteristics of RF signals. This sub-category within RF/Microwave overlaps with the dedicated Spectrum Analyzers page, which covers all Keysight spectrum analyzer types in detail.
Available series on Tekmark: N9321C/N9324C (basic), CXA, EXA, MXA, PXA, UXA (X-Series). 38 models available.
Cables, adapters, attenuators, power dividers, calibration kits, and other accessories required for accurate RF and microwave measurements. Proper accessories are critical for measurement accuracy, and Keysight accessories are matched to their instruments’ connector types and frequency ranges.
Every network analyzer, signal generator, and RF accessory ships with Keysight manufacturer warranty and traceable calibration documentation.
Tekmark’s engineers in Malaysia, Singapore, and the Philippines assist with VNA calibration kit selection, measurement setup guidance, and RF test system configuration.
Network analyzers, signal generators, spectrum analyzers, and 89 RF accessories under one authorized account. Source your entire RF bench from Tekmark without splitting across multiple vendors.
Tekmark’s in-house R&D team supports automated RF test system builds, including SCPI-based multi-instrument orchestration and PXI modular system configuration.
Tekmark Sdn Bhd is an authorized Keysight Technologies distributor in Malaysia, Singapore, and the Philippines, carrying the full Keysight RF and microwave portfolio including network analyzers, signal generators, spectrum analyzers, and 89 RF accessories. Verify on Keysight’s official Partner Finder.
Tekmark carries the ENA Series (entry to mid-range, up to 20 GHz) and PNA/PNA-X Series (high-performance, up to 50 GHz and beyond) for S-parameter, impedance, and mixer characterization. Browse all on the Tekmark e-shop.
The ENA Series covers general-purpose network analysis up to 20 GHz at a lower investment. The PNA/PNA-X provides higher dynamic range, faster speed, and advanced capabilities (noise figure, IMD, mixer characterization) for R&D and high-performance applications. Tekmark’s engineers can evaluate your frequency range and measurement requirements to recommend the right tier.
Submit a request through Tekmark’s contact form or add instruments to your quote cart on the e-shop. Include the instrument type, frequency range, and any required measurement applications or accessories.
Every Keysight RF instrument from Tekmark includes full manufacturer warranty, a traceable calibration certificate, and all standard accessories. RF instruments require periodic recalibration for measurement accuracy, and authorized distributor purchases ensure access to Keysight’s factory calibration services.
Tekmark carries 89 Keysight RF accessories, including calibration kits, RF cables, adapters, attenuators, and power dividers. Tekmark’s team can recommend the correct calibration kit and cable set matched to your instrument’s connector type and frequency range.
RF instruments require careful configuration of frequency range, connector type, calibration kit, and software options. Incorrect configuration leads to inaccurate measurements or costly returns. As an authorized network analyzer distributor, Tekmark’s engineers ensure you order the right setup for your measurement task the first time.
